By Mark Halper
Posting in Architecture
Not the scandal it appears. Find out how to deliver and fund LED lighting for architectural gems. See dazzling photos of London's Tower Bridge. Does it look good in 'control panel blue'?
Rather, it's a little ditty about modern, public, low energy, architectural lighting - and how to pay for it.
Anyone who has wandered near London's iconic Tower Bridge at night recently might have noticed it lit up (notice I didn't write "glow"; more on that below) in gold, silver, blue, red or some collection of colors, over the River Thames.
That's because London has replaced the 118-year-old bridge's static bulbs with LED lighting. While LEDs are well known for the their energy saving qualities, they also lend themselves to digital control because they themselves are digital. LEDs - light emitting diodes - are rudimentary semiconductors, and operators can remotely change their brightness and color scheme.
London and Mayor Boris Johnson ceremoniously switched on the lights in late May, showing off a spectrum of colors - have a look at some of the photos. As the London Olympics approach, expect to see a lot of gold and silver, as the Mayor told us last November when he first announced the project. The lights gleamed white for the Queen's Diamond Jubilee earlier this month.
The lighting scheme entials "1,800 special energy efficient LED lights" and "2,000 meters of energy efficient LED linear lights," according to a mayoral press release (2,000 meters is 6,561 feet - or over a mile - on a bridge that's 801 feet long, has two 213-foot high gothic turrets, and a 143-foot walkway between the towers).
So how much is this costing the taxpayer?
Nothing, according to the release, which says that General Electric and French utility EDF are footing the bill.
The scheme is expected to last for 25 years and, as LEDs do, to save a lot of energy, although not as much as you might guess. The press release says the lights will cut energy consumption by 40 percent, which is a lot less than the "80 percent" claims that LED vendors normally make.
Maybe "40 percent" is a new honesty. Maybe Tower Bridge was already lit by moderately energy efficient lighting.
Or maybe it reflects London's intentions to use the lights more than it had used its one-color bulbs. For instance, it's planning a dazzling light show with the LEDs this Wednesday, to celebrate the Olympic rings that London is lowering onto the bridge. The lights will also show off in special displays during the Olympics.
Now, about that "glow." I like LED lighting for all sorts of reasons, such as the energy savings and control that I've described above. But whenever I see them on public structures, I'm struck by a light quality that's different from what I'm used to. My eye does not perceive a "glow" per se, and it always detects a hint of a "control panel" look. You could name the palette choices things like "control panel blue" or "digital display red."
We've all been conditioned by incandescent bulbs, which burn a filament. As someone wrote recently, fire has provided our light source pretty much since the time man discovered the hot stuff. I'm getting to like outdoor LED lighting. It presents more colorful options. But let's face it, it is somewhat colder than a glow. How do you see it?
Photos, top to bottom: Simon Kennedy, Andy Matthews, Andy Matthews, Jason Hawkes, Jason Hawkes. All via GE and Reformer Films.
More public LED illumination on SmartPlanet:
- LEDs to dance at European Championship soccer
- LEDs atop Empire State Building
- LEDs turning sow's ear into silk purse in Paris
- LEDs to bathe London's Tower Bridge in Olympic gold and silver
The ins and outs of LEDs:
- More LED truths and half-truths
- When good lights go bad: LED breakdown
- The hot and cold of LED lighting
Jun 24, 2012
Indoor lighting--LED panel light,fashion dasign,can effectively inhibit glare, to avoid visual fatigue, provide good lighting effect.link:http://www.semledlight.com/LED-Panel-Light.html
two issues with this feature. - light bulbs are not as much "digital" than LEDs - really?.. where do you get your definitions of "digital"? Digital .. as in digital electronics.. "on" or "off", "one" or "zero", binary (two states) at the fundamental level... changing colors/ brightness for both technologies has similar levels of complexity... "digital" has nothing to do with this complexity. Might as well reference the use of AC or DC power in making these distinctions. Second issue: You indicated the power savings cited being significantly different that normally referenced between LEDs and Incandescent lighting. And, indeed, some of the reasons could be the ones mentioned. But for all I know.. the bridge could have been converted to using CFLs 5 years ago ("static bulbs"?).. with the resulting improvement energy efficiency being from the change from CFLs to LEDs .. as less significant improvement. Please a bit more accuracy.. in "click bait" title, and content.